Firmware 1.29.11 - Powered By Kayako SupportSuite

07 Sep 2010

Support Center » Downloads » Firmware 1.29.11

	Firmware 1.29.11

Description BACKUP YOUR DATA PRIOR TO UPGRADING. ONLY UPGRADE IF ASKED BY SUPPORT

FIRMWARE UPGRADE
We are pleased to release the latest update of Firmware. Once downloaded follow these instructions to install

# Download the file and save where you can find the file again as you need to point to the file when uploading.
# Make sure no-one else is logged into your device
# Log into your ACTAtek device with your username and password
# Select "Firmware upgrade"
# Select the "Browse" button to search for the firmware file that you downloaded.
# Once you have selected the file select "upload"
# this will take you to the next screen with the following message
"The firmware upgrade is ready to begin. Check that the upgrade counter is increased by one after the upgrade, otherwise, the upgrade is unsuccessful."
# You can now select upgrade - PLEASE DO NOT POWER DOWN YOUR DEVICE AT THIS POINT OTHERWISE UPGRADE WILL FAIL.
# This process will take between 2-5 minutes depending on your network traffic.
# Once your device makes three beeps the process is finished.
# If you cannot access the device after upgrading please check the IP address is correct
# When you log back in please check your clock settings as they may have to be reset.

Updates in this version include.

********* ACTAtek_1_29.11 *******
- Updated Chinese translation
- Support multiple (up to 16) ext card reader RS485
- Support 20 characters in first name, last name and other name
- Added API: delete event logs except those in recent days
- Improvement on the sync of event log
- Fixed bugs in APIs

********* ACTAtek_1_29.10 *******
- Added the sync of event log remarks to ACTAtek Agent

********* ACTAtek_1_29.9 ********
- Changed wiegand output for accepted login only (except SC login)

********* ACTAtek_1_29.8 ********
- Added the configurable FP contrast for FAM 5.X
- Fixed the failure of external relay in door schedule
- Fixed bug in fail to update access right

********* ACTAtek_1_29.7 *********
- Support new mifare protocol
- Added logging of API usage in system log
- Added more precautions against DB inconsistency
- Fixed bugs in APIs
- Fixed bugs in CGIs

********* ACTAtek_1_29.6 *********
- Support new external reader protocol
- Speed up in CGIs
- Added system logging to log system activities and status
- Reduced the storage of synced sql limit to 5000
- Preserved access rights for deleted secondary
- Added indicators of backup secondary in terminal status page and LCD
- Updated Chinese, French translation, fixed for LCD display in Arabic
- Fixed bugs in APIs
- Fixed bugs in CGIs

********* ACTAtek_1_29.5 *********
- Improved the hints for searching in Attendance Report, Daily Report, View Event Log and Download Report CGIs
- Improved the user instruction when DB corrupted.
- Restricted multiple web logins as user/network/system admin.
- Updated Arabic, German and Chinese translation
- Fixed bugs in APIs
- Fixed bugs in CGIs

********* ACTAtek_1_29.4 *********
- Internal Fix

********* ACTAtek_1_29.3 *********
- Added the lowest security level for ID match in firmware and API
- Added system message and alert on LCD when memory low ( < 3M AND < 1.5M free)
- Added the option to enable alarm when door is open > 30s
- Added the capture of snapshot when remote door open
- Added a length remind box in the user message input box
- Added wiegand output for fingerprint and password login
- Added the searching of access group in view user list CGI
- Added the display of num. of user and automatch user after pressing enter key for 6 times
- Added the checking and enforce at least 2 back-up secondaries for primary terminals
- Added the sending of emergency email when primary offline
- Added custom remarks for manually eventlog
- Added CGI for catpure snapshot for camera terminal
- Combined the remote door open and network carmer into a single page
- Added APIs: getFullLogs(), systemBackup(), systemRestore(),
getTimeZone() setTimeZone() getTerminalDateTime(),
setTerminalDateTime(), getSNTPServer(), setSNTPServer()
- Modified APIs: getTriggers() and updateTrigger() allow the enable and disable of triggers
- Increased the display of user logs to 8 entries in LCD
- Increased the relay 1 or 2 delay up to 1800s when door open schedule is set in CGI and API
- Modified to preserve the previous searching criteria in view eventlog, daily report and attendance report CGIs
- Increase the maximum num. of In/Out records to 10 in attendance report CGI
- Changed the default display of eventlog to today's entries in the view eventlog CGI
- Changed the alert sound when primary offline
- Updated German and Chinese translation

# Many small product enhancements as requested from multiple customers

Where to get the file
http://www.assetoutsourcing.com.au/support/
you will see a file called "Firmware 1.29.11 Download this file then go back to the start of this document and follow the instructions. Please contact us if you have any questions.

Download Details

Filename:

Link